Report item
Item specifics
  • LED Chip Brand: Epistar
  • Average Life (hrs): 50000
  • LED Chip Model: SMD5050
  • Waterproof: No
  • Certification: CCC,CE,FCC,RoHS
  • Occasion: living room
  • Power Source: DC
  • Strip type: SMD
  • LEDs Number/M: 60 pcs/m
  • Model Number: WS2813
  • Brand Name: BTF-LIGHTING
  • Item Type: Strip
  • Specifications (light beads / m): 60
  • Voltage: 5V
  • Power Consumption (W/m): 18W/M
  • is_customized: yes
Product Description

 

Pay attention: 

30,60,144 means :30leds/m, 60leds/m, 144leds/m

IP30: Non- waterproof

IP65: Waterproof in Silicon Coating

IP67: Waterproof in SiliconTube

the length as you choose

 

Main feature:

one pixel damaged will not affect the other LEDs\'working

Dual signal wires version, signal can jump to transfer

 

LED light source: WS2813 LEDs

same protocol as WS2811S but with Dual-signal wires,so can be controlled by the same WS2811/ws2812 controllers

Input voltage:.............DC5v; 

Power:.......................30leds/m----9watt/meter

            .......................60leds/m----18watt/meter

          .......................144leds/m----43.2watt/meter

LED resource:.............WS2813 led(5050 SMD RGB LED with built-in improved version of ws2811 ic)

LED: ...............each LED is separately controlled

IC Type: .....................improved version ws2813 IC(built inside the 5050 smd rgb led) 

of IC: ..................(1 IC drives 1 led chip); 

Pixels:.........                 30/60/meter; 

Pitch: .........................16.6mm(1000/64); 

Grey scale: ................256;

Bits/color: ...................8-bits/color;

FPC Width: :..............30leds/m----10mm

            .......................60leds/m----10mm

         .......................144leds/m----12mm

FPC color: .........    BLACK/White

Protection rate...... IP30/ IP65 /IP67

Colors: ........................Full color RGB, dream color changing; 

Cuttable:......................every LED is cuttable; 

Package: ....................in anti-static bag,IP30 IP65 with 3M adhensive tape on the back(IP67 without 3M adhensive)

each strip with one free male connector for connector

working temperature...............-40 ~ 70 °C
Storage temperature...............-50 ~ 80 °C
Source life...............50,000 hours
Connector...............4PIN connector terminal pair
(Red: 5V power , green: Date line,  Blue: standby date line,Black: GND)

Recommand controllers:

T-1000s,T-8000A;T-100K;T-200K;T-300K

 

Main feature:

(1)One pixel damaged will not affect the other LEDs working.
 
(2)The power protection,if +5V and GND reverse polarity,the LED will not be burned.
 
(3) Dual signal wires version, signal can jump to transfer.
 
(4)The original electronic devices integrated,it does not cause virtual welding in the installation process.

1, all the electronic components are integrated in a 5050 lamp beads, it does not require any other peripheral auxiliary electronic components to form a complete external control pixels. While reducing the product at the time of installation inverted Weld, caused by poor.
2, serial cascade interface, dual-line signal transmission, to achieve the functions of HTTP, which under a single pixel without causing damage to its lower pixel normal lighting, silk ho does not affect the overall results.
3, intelligent reverse polarity protection, product installation access 5V power supply in case of reverse, will not cause damage to the lamp beads.
4, built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform distortion will not accumulate.
6, the transmission distance between any two points in less than 5 meters without any additional signal amplification circuit.
7, when a refresh rate of 30 frames / sec, the number of cascades of not less than 1024 points.
8, the data transmission speed of up to 800Kbps. Light color consistency, cost-effective.


LED WS2813 Symphony light strip Function Description:
Happy control a single lamp, water, windows, rear meteor, chasing, pattern change animation, video, text, and so on. Use of the lamp, in which a pixel bad, does not affect the normal operation of other lights so as not to affect the overall results. Any color can show, random combinations into any pattern, in particular made light of the screen to use. No separate address to write to the lamp can be achieved HTTP, installation easier. Meanwhile lamp beads which also integrates a capacitive resistance, so that electronic components do not need to be on board the auxiliary light bar, thus increasing the stability of the product.

LED WS2813 strip use for :
The product rich colors and bright light, high visibility, more visually appealing. Is widely used in the corridor wall, indoor decoration, product model decorative lighting, decorative lighting consoles, speakers decorative lighting, entertainment, wine cooler bar backlight, smallpox backlight, LED light boxes, LED luminous signs, aquarium supplies, car decoration etc., it is to replace the traditional neon signs, fluorescent lamps and a new generation of lighting.

Package Including:

5m WS2813 Strip

1pcs free 4pin JST connector

If you need power supply ,please click here

 
 
 
 
 
 
Packaging Details
  • Unit Type: piece
  • Package Weight: 0.2kg (0.44lb.)
  • Package Size: 1cm x 1cm x 1cm (0.39in x 0.39in x 0.39in)
Shipping
Calculate your shipping cost by country/region and quantity.
Quantity: Ship to:
Packaging Details
  • Unit Type: piece
  • Package Weight: 0.2kg (0.44lb.)
  • Package Size: 1cm x 1cm x 1cm (0.39in x 0.39in x 0.39in)
Payment
We support the following payment methods. All payments made on AliExpress are processed by Alipay.